BMW E36 Harnesses

  

E36 Chassis Years and Models included (But not limited to):  

  • 92-95    318i/is, 325i/is, m3
  • 96-99    318i, 318ti, 328i/is/ic, m3  

  

The original engines from the chassis listed above include the M42, M44, M50, S50, M52, S52.

*If you are planning on using an automatic transmission, please send us a message.

  

LIFETIME Warranty with all harnesses!

This warranty only extends to the original purchaser and is limited to workmanship only. If you have any problem with these, just send us a message and we will take care of it.

  

We provide harness adapters for all of the following engines:

  • M52TU (Double Vanos)
  • M54
  • S54 (US and Euro)
  • M60 or M62 (obd1)
  • M62TU (obd2)
  • M62 (Bosch ME5.2) 1 single ECU Plug
  • M62 (Bosch ME5.2.1) 5 small ECU Plugs  
  • S62
  • M50/S50/M52/S52 are also available upon request. (Sometimes these are not needed for the e36 chassis) The z3 and the 318ti do require some modifications. Might be easier to send your harness to use to be modified.  

  

We have our own complete diagrams for each of these motors and chassis. For the newer M52TU, M54, S54, M62TU, and S62, we used the E39 and E46 ETM. Therefore the E46 or E39 harness is desired. The standard E46 harness is capable of reaching the original E36 DME location. A weblink will be provided on the instruction sheet to assist you.

  

All fuses and relays are included with all harnesses. With an exception of the USA Timed EKP modul fuel pump relay for the S54 and S62 harness. 1996 and newer E36s use their original OBD2 diagnostic port.

All harnesses have been measured out for LHD vehicles and placing the DME in the original E36 DME location.

RHD is available upon request.

  

Detailed instructions are included with all harnesses

  

EWS must be deleted.

We now offer the M52TU, M54 (B22, B25, and B30), S54, and S62 EWS deletes (Free, with a purchase of an adapter harness). Just send us your ECU to be modified.

**$70 value without a purchase of a harness.

  

We will assist as much as we can throughout your entire engine swap.

  

These can all be customized to order. Please let us know if you have any special requests.  

M52TU for E36

**Must use with MS42 DME

These adapters include the following:

  • Cluster temperature connector
  • OBD2 diagnostic port ('95 and older; '96 and newer use their original OBD2 port)
  • Fuel pump wiring and relay

  

  • OPTIONAL: Secondary Air Pump relay and connector  
    E36 Year
    Options List
    Engine Harness Style
    E36 Chassis Style
    E36 Model (EX: 325is)

    M54 for E36  

    **Must use with MS43 DME 

    These adapters include the following:

    • Cluster temperature connector
    • OBD2 diagnostic port ('95 and older; '96 and newer use their original OBD2 port)
    • Fuel pump wiring and relay
    • Electronic accelerator pedal connector

      

    • OPTIONAL: Secondary Air Pump relay and connector
    E36 Year
    Options List
    Engine Harness Style
    E36 Chassis Style
    E36 Model (EX: 325is)

    S54 for E36

     **Must use with MSS54 or MSS54HP DME

    Please let us know which engine harness and transmission harness you plan on using.

    **The USA version will require the Timed EKP modul fuel pump relay BMW Part# 61357892976. This relay is not included.

      

    These adapters include the following:

    • Cluster temperature connector
    • OBD2 diagnostic port ('95 and older; '96 and newer use their original OBD2 port)
    • Fuel pump wiring
    • Electronic accelerator pedal connector
    • Momentary switch for Sport mode

      

    • OPTIONAL: Secondary Air Pump relay and connector
    E36 Year
    Options List
    Engine Harness Style
    E36 Chassis Style
    Fuel Pump Relay Connector
    E36 Model (EX: 325is)

    M62TU obd2 for E36

    Best used with the E39 engine harness.

      

     These adapters include the following:

    • Cluster temperature connector
    • OBD2 diagnostic port ('95 and older; '96 and newer use their original OBD2 port)
    • Fuel pump wiring and relay
    • Electronic accelerator pedal connector

      

    • OPTIONAL: Secondary Air Pump relay and connector 
    E36 Year
    Options List
    E36 Chassis Style
    E36 Model (EX: 325is)

    S62 for E36  

    **Must use with MSS52 DME  

    **The USA version will require the Timed EKP modul fuel pump relay BMW Part# 61357892976. This relay is not included.

    Best used with the E39/M5 engine harness.

      

    These adapters include the following:

    • Cluster temperature connector
    • OBD2 diagnostic port ('95 and older; '96 and newer use their original OBD2 port)
    • Fuel pump wiring, NO relay (Instructions included)
    • Electronic accelerator pedal connector
    • Momentary switch for Sport mode

      

    • OPTIONAL: Secondary Air Pump relay and connector  
    E36 Year
    Options List
    E36 Chassis Style
    Fuel Pump Relay Connector
    E36 Model (EX: 325is)

    M62 for E36

    Best used with the E39 engine harness. 

    **PRE-97: Intended to be used with the "474" ECU (Bosch ME5.2) (1 Single ECU Plug)

    **POST-97: Intended to be used with the "DME 1" ECU (Bosch ME5.2.1) (5 ECU Plugs)  

      

     These adapters include the following:

    • Cluster temperature
    • OBD2 diagnostic port
    • Fuel pump wiring and relay
    New Engine
    E36 Year
    E36 Model (EX: 325is)

    M60/M62 obd1 for E36

    *Intended to be used with an M60 engine harness with the round X20 connector.

      

    These adapters include the following:

    • X20 Chassis Connector
    • x20 Engine Connector
    • Cluster temperature wiring

      

    • OPTIONAL: A/C wiring
    E36 Year
    Options List
    E36 Model (EX: 325is)

    Standard M50/S50/M52/S52 for E36

    **Please contact us first before you place an order for this harness. You may or may not need this depending on your setup**

    These adapters include the following:

    • Obd1 or Obd2 option available
    • Cluster temperature connector  
    • Fuel pump wiring and relay (If you are using a Z3, M Coupe, or M Roadster harness)
    • ..And anything that your specific setup may need.

      

    • OPTIONAL: "I will send my engine harness to be modified"
    • OPTIONAL: "I would like an adapter for my setup"
    Options List
    Chassis Year
    Chassis Model (EX: 318Ti)
    Harness Model (EX: 96 E36 S52)
    PayPal Acceptance Mark

    © 2020 Redline Motorsport

    Home|ECU/DME|E21 Adapters|E28 Adapters|E30 Adapters|E36 Adapters|Products|Contact Us
     
    FREE Shipping on ALL orders!
    FREE Shipping on ALL orders!
    Created with the QTH.com SiteBuilder.