BMW E30 Harnesses

  

E30 Chassis Years and Models included (But not limited to): :  

  • 84-85    325
  • 86-87    318i, 325/e/es, 325i/is/ic, m3
  • 87-89    316i, 318i/is, 320i/is, 325i/is/ic, 325ix, m3
  • 90-93    318i/is, 325i/is/ic, 325ix,  m3

The original engines from the chassis listed above include the M10, M20, M40, M42, and S14.

*If you are planning on using an automatic transmission, please send us a message.

  

LIFETIME Warranty with all harnesses!

This warranty only extends to the original purchaser and is limited to workmanship only. If you have any problem with these, just send us a message and we will take care of it.

  

We make harness adapters for all of the following engines:

  • M50
  • S50 (US and Euro)
  • M52 (Single Vanos)
  • S52
  • M52TU (Double Vanos)
  • M54
  • S54 (US and Euro)
  • M60 or M62 (obd1)
  • M62 (Bosch ME5.2) 1 single ECU Plug
  • M62 (Bosch ME5.2.1) 5 small ECU Plugs  
  • M62TU (obd2)
  • S62

     

We have our own complete diagrams for each of these motors and chassis. For the newer M52TU, M54, S54, M62TU, and S62, we used the E39 and E46 ETM. Therefore the E46 or E39 harness is desired. The standard E46 harness is capable of reaching the original ECU location in the glovebox. A weblink will be provided on the instruction sheet to assist you.

  

All fuses and relays are included with all harnesses. With an exception of the USA Timed EKP modul fuel pump relay for the S54 and S62 harness.

All harnesses have been measured out for LHD vehicles and placing the DME in the glovebox compartment.

RHD is available upon request.

  

Detailed instructions are included with all harnesses

  

EWS must be deleted.

We now offer the M52TU, M54, S54, and S62 EWS deletes (Free, with a purchase of an adapter harness). Just send us your ECU to be modified and cover the return shipping.

**$70 value without a purchase of a harness.

  

We will assist as much as we can throughout your entire engine swap, not only for the wiring.

  

These can all be customized to order. Please let us know if you have any special requests.

M50/S50/M52/S52 for E30

Use this option if you plan to send us your engine harness to be modified. This option will eliminate the need for an adapter.

Send us a message letting us know your swap plans and we will modify you harness accordingly.

E30 Year
Options List
Additional Options
E30 Model (EX: 325is)

M50/S50/M52/S52 obd1 for E30

These adapters include the following:

  • 3 extra wires for MPG, Tachometer signal, and Vehicle Speed Signal. (84-85 and 86-87 models that have the extra c104 connector in the glovebox)

  

  • OPTIONAL: E34 Oil level sensor connector
  • OPTIONAL: A/C input wiring
  • OPTIONAL: Extra wire for the ABS power (90+ models)
  • OPTIONAL: Oil temperature connector (E30 M3)
E30 Year
Options List
E30 M3 Oil Temperature Connector
E30 Model (EX: 325is)

M52(single vanos)/S52 obd2 for E30

These adapters include the following:

  • 3 extra wires for MPG, Tachometer signal, and Vehicle Speed Signal. (84-85 and 86-87 models that have the extra c104 connector in the glovebox)
  • Cluster Temperature Wiring

  

  • OPTIONAL: E34 Oil level sensor connector
  • OPTIONAL: A/C input wiring
  • OPTIONAL: Extra wire for the ABS power (90+ models)
  • OPTIONAL: Oil temperature connector (E30 M3)
E30 Year
Options List
Engine Harness Style
M3 Oil Temperature Connector
E30 Model (EX: 325is)

M52TU for E30

**Must use with MS42 DME

  

These adapters include the following:

  • Cluster temperature connector
  • OBD2 diagnostic port
  • Fuel pump wiring and relay

  

  • OPTIONAL: E34 Oil level sensor connector
  • OPTIONAL: Extra wire for the ABS power (90+ models)
  • OPTIONAL: Secondary Air Pump wiring and relay 
E30 Year
Options List
Secondary Air Pump Connector
Engine Harness Style
E30 Model (EX: 325is)

M54 for E30  

**Must use with MS43 DME 

  

These adapters include the following:

  • Cluster temperature connector
  • OBD2 diagnostic port
  • Fuel pump wiring and relay
  • Electronic accelerator pedal connector

  

  • OPTIONAL: E34 Oil level sensor wiring
  • OPTIONAL: Extra wire for the ABS power (90+ models)
  • OPTIONAL: Secondary Air Pump wiring and relay
E30 Year
Options List
Secondary Air Pump Connector
Engine Harness Style
E30 Model (EX: 325is)

S54 for E30

**Must use with MSS54 or MSS54HP DME

  

**The USA version will require the Timed EKP modul fuel pump relay BMW Part# 61357892976. This relay is not included.

  

 These adapters include the following:

  • Cluster temperature connector
  • OBD2 diagnostic port
  • Fuel pump wiring
  • Electronic accelerator pedal connector
  • Momentary switch for Sport mode

  

  • OPTIONAL: Extra wire for the ABS power (90+ models)
  • OPTIONAL: Secondary Air Pump wiring and relay 
E30 Year
ABS Brakes
Fuel Pump Relay Connector
Secondary Air Pump Connector
Engine Harness Style
E30 Model (EX: 325is)

S62 for E30

**Must use with MSS52 DME  

**The USA version will require the Timed EKP modul fuel pump relay BMW Part# 61357892976. This relay is not included.

Best used with the E39/M5 engine harness.

  

 These adapters include the following:

  • Cluster temperature connector
  • OBD2 diagnostic port
  • Fuel pump wiring
  • Electronic accelerator pedal connector
  • Momentary switch for Sport mode

  

  • OPTIONAL: Extra wire for the ABS power (90+ models)
  • OPTIONAL: Secondary Air Pump wiring and relay 
E30 Year
ABS Brakes
Secondary Air Pump Connector
Fuel Pump Relay Connector
E30 Model (EX: 325is)

M62TU for E30

Best used with the E39 engine harness.

Intended to be used with the "DME 7" ECU (Bosch ME7.2) (5 ECU Plugs)

  

 These adapters include the following:

  • Cluster temperature connector
  • OBD2 diagnostic port
  • Fuel pump wiring and relay
  • Electronic accelerator pedal connector

  

  • OPTIONAL: Extra wire for the ABS power (90+ models)
  • OPTIONAL: SAP wiring and relay
E30 Year
ABS Brakes
Secondary Air Pump Connector
E30 Model (EX: 325is)

M62 for E30

Best used with the E39 engine harness. 

**PRE-97: Intended to be used with the "474" ECU (Bosch ME5.2) (1 Single ECU Plug)

**POST-97: Intended to be used with the "DME 1" ECU (Bosch ME5.2.1) (5 ECU Plugs)  

  

 These adapters include the following:

  • Cluster temperature connector
  • OBD2 diagnostic port
  • Fuel pump wiring and relay

  

  • OPTIONAL: Extra wire for the ABS power (90+ models)
New Engine
E30 Year
ABS Brakes
E30 Model (EX: 325is)

M60/M62 obd1 for E30

*Intended to be used with an M60 engine harness with the round X20 connector.

  

These adapters include the following:  

  

  • OPTIONAL: A/C input wiring
  • OPTIONAL: Oil level sensor wiring (E30s with check control panel)
  • OPTIONAL: ABS power wire (90+ models)       

 

  

E30 Year
Options List
E30 Model (EX: 325is)
PayPal Acceptance Mark

© 2020 Redline Motorsport

Home|ECU/DME|E21 Adapters|E28 Adapters|E30 Adapters|E36 Adapters|Products|Contact Us
 
FREE Shipping on ALL orders!!!
FREE Shipping on ALL orders!!!
Created with the QTH.com SiteBuilder.